What if I told you that your truck lifts could be even better?

I’m not talking about upgrades; I’m talking about a structural upgrade – a lift kit.

Sounds cool? It sure does. Installing a lift kit is a complex process; you have to know what you’re doing.

Don’t worry, we’ll show you exactly what you need to know.

Let’s get right into it on how to install a lift kit!

The Right Lift Kits

Right Lift Kits

Before you purchase a lift kit, you need to take several factors into consideration. Primarily, you need to decide what kind of terrain you’ll be driving and what type of look you’re going for. Will you be doing any serious off-roading, or will the used trucks primarily be used to show?

Answering these questions will help you determine which lift kit is right for you.

Materials Needed

First and foremost, it is important to gather all of the necessary materials before beginning the project. This includes the lift kit itself, jack, jack stands, wrench, and a drill. Once everything is gathered, the next step is to follow the instructions that come with the kit.

These will vary depending on the specific kit being used, but they will all generally be similar. The most important thing is to take your time and be careful, as rushing can easily lead to mistakes. With a bit of care and effort, installing a lift shocks can be a fun and satisfying experience.

Jacking up the Truck

Jacking up the Truck

Once you have everything you need, begin jacking up your truck suspension and placing the jack stands under the frame. Then, using the wrench, remove the bolts that connect the shocks to the frame. Next, remove the bolts that connect the shocks to the axle.

At this point, you should be able to remove the shocks completely.

Front Suspension & Rear Suspension

Remove the upper and lower control arms. Once the control arms are removed, the only thing left holding the front of the truck up is the coil spring. Remove the coil spring and then the spindle. Now, the front and rear suspension are completely disassembled.

To finish the installation, follow the reverse order of these steps.

Test Drive Your Truck

Test Drive

Assuming the installation was successful, the next step is to test the truck’s new clearance. Drive over some rough terrain and see if the truck shocks is able to clear it without bottoming out.

If all goes well, then the lift kit was installed correctly and the truck is now ready to take on even more challenging terrain.

How to Install a Lift Kit Made Simple

If you’re looking to give your truck a little more height, a lift kit is a great option. Installing a lift kit is a pretty simple process, as long as you have the right tools. To know how to install a lift kit, follow the steps in this article, and you’ll have your truck lifted in no time.

Do you want to read more about automotive topics? Check out the rest of our website for other informative content.

1 Shares:
You May Also Like