Pool Maintenance 101: How to Raise Pool pH
Are you wondering how to raise your pool’s pH?
Maintaining a pool can be quite a hassle, especially if this is your first time doing it. One of the most important aspects of pool maintenance is keeping the pH levels balanced.
If your pool’s pH levels are off, it could lead to an invasion of chemicals and microorganisms you don’t want in your home. Luckily, it’s pretty easy to bring back the pH levels to normal.
Read on to learn everything you need to know about pool maintenance, including how to raise your pH.
Test the Water
To start, you need to know the current pool pH levels. Don’t worry; it’s not complicated! You can buy a pool water testing kit from the store or online.
Just follow the instructions to take a small water sample and add some drops of a special liquid. The color will change, and that will tell you the pH level.
Find Your Target Range
The pH level should be between 7.2 and 7.8 for a healthy pool. The best range is between 7.4 and 7.6. If your pH is below 7.2, it’s too low, and that’s when you need to raise it.
Choose the Right pH Increaser
To raise the pH, you need a pH increase. It’s a chemical that helps balance the water. There are two common ones: soda ash and baking soda.
Soda ash is more potent and better for significant adjustments. Meanwhile, baking soda is milder and suitable for small changes.
Figure Out How Much to Add
Check the instructions on the product label or the package. They’ll tell you how much pH increaser to add based on your pool size and how much pH you need to raise.
Mix the pH Increaser
Mix it first to ensure the pH increaser spreads evenly in your pool. Get a bucket of water and add the right amount of pH increaser. Stir it well until it dissolves completely.
Add the pH Increaser to the Pool
Now it’s time to put the dissolved pH increaser into the pool. But wait! You need to have the pool’s pump running while you do this.
Walk around the pool and pour the solution across the water’s surface. Don’t pour it near the walls or the skimmer. This way, it’ll spread evenly.
Wait and Test Again
Be patient and let the pool water circulate for about six to eight hours. This gives the pH increaser time to mix.
After that, you can test the pH again using your kit to see if it’s in the target range. If not, you can repeat the process and add more increases if needed.
Keep an Eye on the pH
Whether you’ve just completed a swimming pool installation or have been enjoying your pool for years, remember that pool maintenance is an ongoing thing!
This means you have to keep an eye on your pool’s pH regularly. Test it at least once a week to ensure it stays in the right range.
Learn How To Raise Pool pH Today
Taking care of your pool’s pH is critical to keep it healthy and safe. Following the tips discussed in this article and regularly testing your pool’s pH will help ensure your family is always in safe water. For additional help, consider seeking out professional services and materials.
Don’t delay! Protect your pool investment by checking your pH today!
Was this article helpful? If so, check out the rest of our site for more informative content.
